Commercial Roofing Company in Erlanger
See How a Roof Gets Checked Before Any Work Is Priced
As a commercial roofing company in Erlanger, we repair, recover, and replace low-slope and metal roofs, and every job starts on the roof itself.
How We Approach Commercial Roofing in Erlanger
Work at our commercial roofing company in Erlanger follows what the roof shows. Core cuts, seam checks, and a look at the deck from inside come before any talk of systems or price.
Weather and code shape the schedule. Cincinnati-area normals put January highs near 40°F and lows near 23°F, so adhered work shifts to warmer midday hours, while the 2018 Kentucky Building Code sets recover limits and edge metal rules through PDS.
- Layer count and insulation moisture checked before a plan
- Adhesive, primer, and welder temperature limits followed
- Permits through Planning and Development Services of Kenton County
- Daily sections sized to what can be closed by evening
Seeing Water After Every Heavy Rain?
Repeat leaks after storms usually trace to a drain, a curb, or a wall flashing. Book a roof visit and point us to where the water shows inside.
What Our Commercial Roofing Company in Erlanger Checks First
The first walk covers the whole roof, so the options you hear afterward match its real condition.
- Core cuts to count layers and test insulation moisture
- Seam and lap condition across the open field
- Flashing at walls, curbs, pipes, and skylights
- Drains, scuppers, and gutters checked for clogs and damage
- Deck condition viewed from the building interior
- Edge metal, coping, and fascia fastening
- Photos of each problem area for the owner
- A plain explanation of repair, recover, or replacement
What We Will Not Do on Erlanger Commercial Roofing Jobs
A few lines we hold on every roof, and what happens instead.
| We Will Not | What We Do Instead |
|---|---|
| Lay a new membrane over wet insulation | Remove soaked boards down to the deck and replace them with dry polyiso and cover board |
| Recover a roof that already has two roofs on it | Tear off to the deck, as the code requires, and repair soft or rusted deck areas |
| Reuse rusted drain rings or tired edge metal | Fit new clamping rings, strainers, scupper liners, fascia, and coping |
| Leave units sitting on short curbs | Raise curbs while units are lifted so base flashing has room |
| Open more roof than can be closed by evening | Size each section to the crew and the forecast, with night tie-ins |
Talk to a Commercial Roofing Company in Erlanger
Start with a roof walk and core cuts, then decide on repair, recover, or replacement with the findings in hand.